- Off Grid
- Solar Kits
- Balance of System
- Solar Cells
Enphase M215-60-2LL-S22/3 Microinverter
Please contact us for AC trunk cables and interconnect cables.
The Enphase Energy Micro-Inverter System improves energy harvest, increases reliability and dramatically simplifies design, installation and management of solar power systems. The Enphase System includes the Microinverter, the Envoy Communications Gateway, and the web-based Enlighten monitoring and analysis website.
Maximum energy production
Resilient to dust, debris and shading
Performance monitoring per module
System availability greater than 99.8%
No single point of system failure
Quick & simple design, installation and management
24/7 monitoring and analysis
Low voltage DC
Reduced fire risk
Enphase Engage Cabling System
The M215 incorporates DC connectors and an AC connector. There is no integral AC cable on the M215. The Enphase Cabling System accomplishes the AC connection.
The Cabling System is a continuous length of 12 AWG, outdoor rated cable, with integrated connectors for microinverters. These connectors are preinstalled along the entire cable and spaced to accommodate both portrait and landscape PV module orientations.
The cable is installed by simply rolling out the desired length of cable and cutting it to size. One end is wired directly into the junction box at the head of the branch circuit, eliminating the need for a separate AC interconnect cable. The other end is sealed from the environment using an Enphase Branch Terminator. The M215 AC cable connectors are then plugged into the regularly-spaced connectors as shown.
The Enphase Cabling System is available in two connector spacing options and two voltage types. Depending upon installer needs, the cabling is also available in a variety of lengths.
Connector Spacing Options
The gap between connectors on the cable can be either 1.025 meters (40”) or 1.7 meters (67”). The 1.025 meter spacing is best suited for connecting PV modules installed in portrait mode, while the 1.7 meter gap is best suited to PV modules installed in landscape mode.
Peak Inverter Efficiency: 96.5%
CEC Weighted Efficiency: 96%
Recommended PV Input (STC): 260W
Maximum DC Input Voltage: 45V
Maximum DC Input Current: 10A
AC Nominal Voltage: 208 V 240 V
AC Frequency: 60Hertz
Continous AC Power Output: 215Watts
Nominal AC Voltage: 208Volts
Dimensions: 1 × 6.8 × 6.2 inches
Weight: 3.5 pounds
25 year limited warranty
Integrates with Enphase Engage Cable
CSA listed per UL 1741/IEE1547
Need Trunk Cables? Terminators? Disconnect Tools?
We Got them! Please contact us
Please click HERE for more information.