Completely maintenance free. Sealed construction eliminates periodic watering, corrosive acid fumes and spills. Electrolyte will not stratify, no equalization charging required. Allows faster recharge. Increases durability and deep cycle ability for heavy demand applications. Less than 2% per month stand loss means little deterioration during transport and storage. Tank formation ensures voltage matching between cells. Transports easily and safely by air. No special containers needed. Ensures reliable service, support and quality MADE IN THE USA
Nominal Voltage (V)
Capacity C/100 (Ah)
Capacity C/20 (Ah)
10.9 x 6.8 x 9.9"
State of Charge
12.85 or higher
12.80 or higher
Battery state of charge can be determined by measuring the open circuit voltage. Consult the below table.
NOTE: Divide values in half for 6-volt battery(ies) *The “true” O.C.V. of a battery can only be determined
after the battery has been removed from the load (charge / discharge) for 24 hours.
Charging: Consult Charger User Manual of specific application for Safety and Operating requirements. For cyclic applications it is important that the battery(ies) be charged fully after each discharge. It is recommended that 108% to 115% of the Ah (Amp Hour) capacity removed from the battery(ies) be replaced after each discharge.This additional Ah is to compensate for any efficiency losses between the battery charger and the battery(ies)